The DRE- 80c Pump System includes:

• DRE-80 High Vacuum Diaphragm Pump
• Encapsulated in a Heavy Duty Aluminum Frame
• 100' easy flex Suction Hose with JET NOZZLE
• 75' Discharge Hose
• 3" Hole Saver (other sizes available)
• Jet Nozzle - JT175 (1 3/4" O/D) 

Constructed of aluminum, the pump is designed to perform in on/off, tough duty applications without freezing or stalling.  

Sliding check valves and pressure relief assemblies ensure that the system runs efficiently and reliably with enhanced performance characteristics over past pumps. Our pump runs lube-free.  

The DRYRITE pump system is constructed of non-ferrous metals which are safe and compatible with the corrosive chemicals used in explosives.  

The suction hose is lightweight and is designed to be maneuverable and flexible, even in extreme conditions.  

The unit is powered by compressed air.  (This system is not designed to pump explosives). 

It takes only minutes to dewater your boreholes.
While the time it takes to dewater can vary, a 3 1/2" x 50' hole can be dewatered in about 2 minutes. 

DRYRITE pumps are very easy to use, are easy to move around on a shot, and require very little maintenance.  

Fractured rock is never a problem.

Unlike other dewatering systems, you don't need to pressurize your hole.  If you can lower a hose into a hole, you can effectively dewater with DRYRITE.  

Most customers recover the cost of the pump system on the first day of use.  
In extensive on-site tests, users achieved cost savings of up to 65% over using conventional wet hole explosives.  This pump system will immediately pay for itself.

The pump is wear resistant and with proper use will last for many years.  It requires only minimal maintenance and comes with a one year warranty.